Presented by the company for the first time, SMASH Dragon is an advanced robotic It shall also include a 10-year manufacture’s limited warranty.SMART SHOOTER, a world-class designer, developer, and manufacturer of innovative fire control systems that significantly increase the accuracy and lethality of small arms, reveals the SMASH Dragon: an armed drone system incorporating Smart Shooter’s combat-proven SMASH Technology that ensures precise target elimination. The unit shall at a minimum meet the requirements of UL217, NFPA72, The State of California Fire Marshall, NFPA 101 (One and two family dwellings) Federal Housing Authority (FHA), Housing and Urban Development (HUD). The unit shall incorporate one green LED to indicate the presence of AC power. The rapid flashing LED and pulsating alarm will continue until the air is cleared. Alarm Condition: When the alarm senses products of combustion and goes into alarm, the red LED will flash rapidly (one flash per second). The red LED will indicate one of two conditions: Standby Condition: The red LED will flash every 30-40 seconds to indicate that the smoke alarm is operating properly.
![smart shooter 3.36 smart shooter 3.36](https://kuvacode.com/smartshooter3/images/app_diagram_v3.png)
The unit shall incorporate one red LED to indicate the alarm’s current status and mode of operation. The unit shall also include a low battery warning utilizing a brief alarm chirp every 30-40 seconds for a minimum of seven (7) days. The unit shall include a piezoelectric horn that is rated at 85dB at 10 feet. This sequence tests the unit’s electronics, battery and horn to ensure proper operation. The alarm shall include a test button that will electronically simulate the presence of smoke and cause the unit to go into alarm. The unit shall provide optional tamper resistance that deters removal of the unit from the wall or ceiling. With 18 initiation devices (smoke, heat, CO, etc.), interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices, of which 12 can be smoke alarms. A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement. The electrical connection (to the alarm) shall be made with a plug-in connector. The smoke alarm can be installed on any standard single gang electrical box, up to a 4” octagon junction box. The temperature operation range shall be between 40˚F and 100˚F (4˚C and 38˚C) and the humidity operation range shall be 5% - 95% relative humidity. The unit shall incorporate a photoelectric sensor with nominal sensitivity of 1.20%/ft to 3.36%/ft. It shall be powered by a 120VAC, 60Hz, 80mA source along with a 9V battery back up.
![smart shooter 3.36 smart shooter 3.36](https://defensereview.com/wp-content/uploads/2021/03/Smart-Shooter-SMASH-2000_DefenseReview-DR_2.jpg)
The smoke alarm shall be Kidde model P12040 or approved equal. Green, receiving ac power, Red, alarm modeĪrchitectural and Engineering Specifications The Kidde model P12040 is a 120VAC powered alarm that includes a 9V battery backup to provide continuous protection during a power failure and included a quick connect power harness to make installation simple.
![smart shooter 3.36 smart shooter 3.36](http://techtime.news/wp-content/uploads/sites/2/2021/03/IWOO-Smart-Shooter.jpg)
Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner that photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. This alarm uses photoelectric sensing technology. The Kidde P12040 includes a test button, quick-connect power harness and offers a 10-year limited warranty.
![smart shooter 3.36 smart shooter 3.36](https://www.uasvision.com/wp-content/uploads/2020/06/6225998.jpg)
This advanced smoke alarm has the ability to function as a stand-alone unit or in an interconnected system. The Kidde P12040 is a 120VAC powered photoelectric smoke alarm with 9V battery back up.